Train Modeling Digital Devices Control (DCC)


        This is the second part of the DCC project, controlling all accessories via the DCC data on the track.  You can connect: switches, lights and many more…  This board has hardware address setting via jumpers, so you can have many of those


  • Directly connected to the track
  • Very low cost
  • 8 relay output


Schematic DCC Accessory Control in PDF format

Source Code

2 Comments to “Train Modeling Digital Devices Control (DCC)”

  • piksov April 22, 2010 at 7:15 pm

    Hi, pls update your links to the schematic and the source code: both link do not work

  • admin April 22, 2010 at 7:20 pm

    It’s now fix

Post comment

Please note

All my source codes were taken from my personal projects.

Everything is for your information only. The C/C++ codes have been written
with ICCAVR. You can find the header and source CRT files by downloading their compiler.

All is for your information and everything is AS IS without any warranty of any kind. No other files are available and I don't make any modification for any body.



Electronic Links


AGC Anemometer AVR AVR Bootloader Bootloader Capacitence Capacitor Clock Color Control DCC Debugger Devices Digital driver Function Generator High Gain Microphone Humidity Inductance Inductor Laser LCD LED 3W Library Lightning Detector MegaLoad Meter Moodlight Mood Light MS5534 Nixie OscilloScope projector Rain Fall Sensor rgb RGB LED Scop Sensor SHT75 Temperature Terminal Tipping Bucket Train Modeling Vintage Water Detector